Plato de ducha antivuelco Ella 62×38 ADA – Desagüe central
$1,474.00
Acerca de nuestro plato de ducha sin barreras
La base de ducha Ella, diseñada pensando en la accesibilidad y la facilidad, es la solución perfecta para proyectos de conversión de bañera a ducha sin barreras.
Con unas medidas de 62″ x 38″, esta base de ducha sin barreras es ideal para sustituir una bañera tradicional o una ducha con umbral, ofreciendo una experiencia de baño más accesible y cómoda.
Para personalizar aún más tu cuarto de baño, combina esta base de ducha con los paneles de pared de ducha sin juntas de Ella, que ofrecen un aspecto elegante y moderno sin las molestias del mantenimiento de los azulejos tradicionales.
También puedes optar por los azulejos que tú elijas para crear un diseño personalizado que complemente tu estilo.
Para mejorar la seguridad y la funcionalidad, considera la posibilidad de añadir nuestra gama de barras de agarre y accesorios, diseñados específicamente para integrarse a la perfección con el plato de ducha Ella’s.
Estos complementos garantizan un entorno de baño más seguro, proporcionando apoyo adicional donde más se necesita. Para más información, llama al 800-480-6850.
Beneficios clave
- Acrílico aplicado AcrylX™ de primera calidad
- Suelo Grip sure™ para mayor seguridad
- EasyBase™ autoportante y prenivelada
- Puerta de ducha respetuosa
- Los accesorios son opcionales y se envían sueltos para su instalación en el campo
- En stock para envío rápido
Conjunto de atributos de plato de ducha sin barreras
- Cumplimiento de códigos : ADA/ANSI/TAS
- Desbaste por encima del suelo : No
- Tipo accesible : Conforme al código
- Tipo de instalación : Alcoba
- Material : AcrylX™
- Suelo antideslizante con textura
- Conforme a la ADA
- Pre-nivelado, no necesita recreo
Dimensiones del plato de ducha sin barreras
- Altura del umbral: 3/4
- Altura: 4 1/2
- Anchura: 38 1/4
- Longitud: 62 1/2″
- Peso aproximado: 75,00 lb
Fácil instalación
Los platos de ducha preinclinados y reforzados están diseñados para minimizar el tiempo de construcción y pueden instalarse fácilmente sobre el subsuelo existente sin necesidad de empotrar. El umbral biselado accesible de 7/8″ y el suelo texturizado antideslizante aumentan la seguridad del baño. El umbral incluye una estructura de barras de acero inoxidable incorporada, diseñada para resistir años de uso y tráfico de sillas de ruedas.
INCLUDED FEATURES FOR
ELLA BARRIER FREE SHOWER BASES
Drain + Collapsible Rubber Dam
Our wheelchair and foot-friendly collapsible rubber dam, also known as a water retainer or water stopper, offers a user-friendly solution for water containment. Designed to prevent falls and reduce facility liability and maintenance, it comes standard with our Roll-in Wheelchair Accessible Shower Bases. No special tools are required for installation, thanks to the strong, water-resistant, self-adhesive tape that ensures a mess-free application.
INCLUDED FEATURES FOR
ELLA BARRIER FREE SHOWER BASES
Drain + Collapsible Rubber Dam
Our wheelchair and foot-friendly collapsible rubber dam, also known as a water retainer or water stopper, offers a user-friendly solution for water containment. Designed to prevent falls and reduce facility liability and maintenance, it comes standard with our Roll-in Wheelchair Accessible Shower Bases. No special tools are required for installation, thanks to the strong, water-resistant, self-adhesive tape that ensures a mess-free application.
HOW-TO-INSTALL
Collapsible Rubber Dam
Important Note!
For proper adhesion, the shower base area under the collapsible dam must be cleaned with Isopropyl Alcohol before installing the collapsible dam.
Tools & Materials required
Utility KnifeClean ragsTape measureStraight edgeMasking tapeRubbing AlcoholClear or White 100% Silicone adhesive caulk.Tile Application Grout Line joints
The grout line beneath the retainer must be caulked to prevent water travel beneath the dam. Wipe off excess caulk and let cure (according to caulk specifications) prior to use.
- Chemically clean mounting surface with clean rag and denatured rubbing alcohol. This is paramount to insuring proper adhesion.
- Peel back orange tape approximately 24 inches.
- Starting approximately ½ inch from square corner, press on and adhere first 4 inches of strip.
- Stretch align and pull toward center of shower, press firmly to shower surface.
- Pull and stretch to wall and align before removing remainder of orange peel-off strip.
- Peel back remaining length, repeat stretch align and pull to opposite corner.
- Measure and cut excess dam with razor blade approximately ½ inch from wall.
- Dry fit square caps to insure proper fit (trim if required).
- Remove caps and apply clear silicone adhesive caulk to male end of cap and re-insert male end into collapsible dam.
- Flex cap away from the wall to apply silicone caulk to wall side of cap.
- Release and wipe away excess caulking using clean alcohol-soaked rag.
- Apply masking tape to hold cap in position if needed until adhesive is cured.
Collapsible Rubber Dam
HOW-TO-INSTALL
Important Note!
For proper adhesion, the shower base area under the collapsible dam must be cleaned with Isopropyl Alcohol before installing the collapsible dam.
Tools & Materials required
Utility KnifeClean ragsTape measureStraight edgeMasking tapeRubbing AlcoholClear or White 100% Silicone adhesive caulk.Tile Application Grout Line joints
The grout line beneath the retainer must be caulked to prevent water travel beneath the dam. Wipe off excess caulk and let cure (according to caulk specifications) prior to use.
- Chemically clean mounting surface with clean rag and denatured rubbing alcohol. This is paramount to insuring proper adhesion.
- Peel back orange tape approximately 24 inches.
- Starting approximately ½ inch from square corner, press on and adhere first 4 inches of strip.
- Stretch align and pull toward center of shower, press firmly to shower surface.
- Pull and stretch to wall and align before removing remainder of orange peel-off strip.
- Peel back remaining length, repeat stretch align and pull to opposite corner.
- Measure and cut excess dam with razor blade approximately ½ inch from wall.
- Dry fit square caps to insure proper fit (trim if required).
- Remove caps and apply clear silicone adhesive caulk to male end of cap and re-insert male end into collapsible dam.
- Flex cap away from the wall to apply silicone caulk to wall side of cap.
- Release and wipe away excess caulking using clean alcohol-soaked rag.
- Apply masking tape to hold cap in position if needed until adhesive is cured.
